Đang truy cập: 2
Trong ngày: 2
Trong tuần: 163
Lượt truy cập: 219883

Die Casting

The most common aluminum for die cast manufacturersare A356 and A380.The materials suitable for die casting are Aluminum and Zinc.The most common aluminum for die casting are A356 and A380.And for zinc material, it could be Zamak serise and zinc alloys.We can make die casted hinges, locks, automobile and motorcycle parts, gear box, etc.The largest die casted part we could make is sized by 750mm*750mm, around 45kg.The largest die casting equipment we have is 3800 tons.We also do secondary operation including heat treatment and shot blasting.We have high technical force and can also machine the part after casting, we have got CNC machining center and CNC lathe equipment.

Low Pressure Casting

Characteristics of Low Pressure Casting:

Investment Casting

nvestment casting is also called Lost wax casting.The largest steel investment casting we can make is 300kg and 30kg for aluminum investment casting.The unit cost by investment casting is higher than die casting or sand casting, but it has a lower equipment cost.Investment casting can make very complicated shapes which cannot be reached by die casting or sand casting.Two types of investment casting are water glass investment casting and silica sol investment casting.

SAND CASTING

Cát đúc sử dụng cát làm vật liệu khuôn, nó là tương đối rẻ và đầy đủ vật liệu chịu lửa và hơn 70% của tất cả các vật đúc bằng kim loại được sản xuất thông qua một quá trình đúc cát.

Gravity casting

Gravity casting suitable material: Aluminum

Metal Forging

The metal forging is a manufacturing process involving the shaping of metal fabrication using localized compressive forces. Forged parts can range in weight from less than a kilogram to 580 metric tons. Forged parts usually require further processing to achieve a finished part.


CÔNG TY TNHH SẢN XUẤT VÀ THƯƠNG MẠI QUỐC TẾ ANH ĐỨC

ANH DUC MANUFACTURING AND INTERNATIONAL TRADING LIMITED COMPANY
------------------------------------------------------------------

Địa chỉ : 

Đúc khuôn cát-đúc áp lực-Sơn Tĩnh điện-Nhà Máy Lắp Ráp: Số 04 đường Thuần Mỹ, Cụm CN Ngô Quyền, Phường Cẩm Thượng, Tp Hải Dương.

Đúc đồng: Huyện Lương Tài, Tỉnh Bắc Ninh, Việt Nam.

Đúc gang: Huyện Thủy Nguyên, Tỉnh Hải Phòng, Việt Nam.

Email:congtyanhduchd@gmail.com ; Tel. +84 2203 599996